Running Mode: Forward Only with Brake: is Intended for competition use, this mode allows only forward and brake controls. No reverse to stop racers causing accidents on track. / Forward/Reverse with Brake: This mode is the basic all-around mode, allowing forward, reverse and brake c...
Features:
Running Mode: Forward Only with Brake: is Intended for competition use, this mode allows only forward and brake controls. No reverse to stop racers causing accidents on track. / Forward/Reverse with Brake: This mode is the basic all-around mode, allowing forward, reverse and brake controls. To engage reverse while moving forward, apply the brake until the vehicle has come to a complete stop, release brake, then apply the brake again. While braking or in reverse, engaging the throttle will result in the vehicle immediately accelerating forward.
Drag Brake Force: Adjusts the amount of brake automatically applied when the throttle is returned to the neutral position. This simulates the engine braking effect of a full-scale vehicle, allowing improved turn-in and your vehicle's general response to controls.
Low Voltage Cut-off: This function helps to prevent battery over-discharge. The ESC continuously monitors the battery's voltage. If the voltage falls below the voltage threshold for 2 seconds, the output power shuts off and the red LED flashes twice repeatedly. The cut-off threshold calculation is based on individual Li-Po cell voltage. For Ni-MH batteries, if the voltage battery pack is higher than 9.0V, it will be treated as a 3-cell Li-Po battery pack; if it is lower than 9.0V, it will be treated as a 2-cell Li-Po battery pack. Example: for an 8.0V Ni-MH battery pack used with a 2.6V/cell threshold, it will be treated as a 2-cell Li-Po battery pack and the low-voltage cut-off threshold will be 5.2V (2.6 x 2=5.2).
Start Mode: Sets the initial throttle punch when the car accelerates. Level 1 gives a very soft initial acceleration and Level 4 gives a stronger initial acceleration.
Max Brake Force: Adjusts the maximum braking force. A higher value provides stronger braking, but can also cause the wheels to lock, resulting in loss of control of the car.
Punch Select: Level 1 (Soft) to Level 9 (Very aggressive). If you choose Levels 7-9, use a high-quality battery pack with powerful discharge ability. Without a high-quality battery pack, the modes will not give a bursting start effect. If the motor does not run smoothly (IE: 'Cogging'), choose a better-quality battery or change the gearing to a higher ratio.
Specifications:
QUICK SPEC
TYPE: Sensorless Brushless Electronic Speed Control
CONSTANT/PEAK CURRENT: 60A/90A
RESISTANCE: 1.7mO
FUNCTIONALITY: Proportional forward, proportional reverse with braking delay
